Gold giant Australia is firing back up a record exploration boom
Gold miners in Australia — set to leapfrog China next year to become the top producer — are resuming a pandemic-disrupted exploration spree as prices surge amid a dearth of major discoveries.
“Gold does really well in volatile times, so my sense of this is we’re on the cusp of a fairly major boom,” said Rob Bills, chief executive officer of Emmerson Resources Ltd., which plans to restart exploration drilling this week as the nation continues to ease Covid-19-related curbs. “Those companies that have got cash will turn the tap on fairly quickly.”
Spending on gold exploration in Australia rose to a new record in the final quarter of 2019, while the annual total of more than A$1 billion ($656 million) was about 20% higher than the previous year, according to government estimates. It’s much needed as there have been no major global gold discoveries in the past three years and only 25 in the last decade, S&P Global Market Intelligence said in a report this month.
Gold explorers are eager to restore activity amid forecasts the metal will trade higher for the next several years, even while other industries, and some large metals producers, have announced plans to trim capital expenditure amid caution over the pace of a post-virus recovery.
Restrictions on travel between — and within –Australia’s states, led the mining sector to largely halt on-the-ground exploration work as measures to curb the spread of the virus were introduced from March.
This left Perth-based Emmerson’s main field geologist stranded on the island state of Tasmania, while progress on remote projects in the Northern Territory has been impacted by actions aimed at protecting indigenous communities.
Newcrest Mining Ltd., the country’s top gold producer, is developing plans to restart exploration programs stalled in countries including Chile and Ecuador, according to an emailed statement. Some activities at isolated sites in Western Australia and Canada have continued during the shutdowns.
A lack of major new discoveries also may be a driver in a spree of deal-making that’s hit the gold sector in the past two years. The boom may be an indication that “large, new, economically discoverable gold mining deposits simply no longer exist,” according to Adrian Courtenay, a fund manager at Odey Asset Management LLP.
Gold could hit $2,000 an ounce and will remain elevated over the next five years as governments launch stimulus programs, according to Newmont Corp., the world’s largest producer. Investors including VanEck also forecast gold prices to advance.
Miners are also looking to exploration to offset a forecast decline in Australia’s gold output as aging operations are retired. Gold volumes in the nation are projected to peak in the 12 months to mid-2022 before gradually falling back, according to the country’s government.
“It is an ideal environment for gold companies,” Emmerson’s Bills said. “The cost of drilling hasn’t gone up, and there’s plenty of drill rigs out there –- the market is quite responsive to discoveries, we’re quite positive.”
“After several years of declining capex, mining investment remains poised to lift over 2H 2020 and beyond. Despite the pandemic, precursors of high prices, followed by record levels of exploration expenditure, remain, and could see investment lift beyond replacement levels over coming years”
James McIntyre, Bloomberg Economics
Still, some small companies have struggled to raise money to fund new campaigns and will need more support from capital markets, or to partner with larger producers with stronger balance sheets, Bills said.
Extending the higher rates of exploration spending will also need continued easing of travel curbs or government help to facilitate access to remote regions, along with better access to funding, according to Will Robinson, CEO of Encounter Resources Ltd., which has projects in Western Australia and a joint venture agreement with Newcrest.
“If those restrictions are eased, I’d expect expenditure to pick up again,” Robinson said. “You’ve got a high gold price, declining reserves, massive investments in new technologies and new data sets to facilitate exploration success — I think that’s starting to bear fruit.”
Ball Mill Liner Material Selection
Different crushed material, different working conditions need different material liners to suit. Also, the coarse grinding compartment and fine grinding compartment need different material liners.
H&G Machinery supplies the following material to cast your ball mill liner:
Manganese Steel
The manganese content of the high manganese steel ball mill lining plate is generally 11-14%, and the carbon content is generally 0.90-1.50%, most of which are above 1.0%. At low impact loads, the hardness can reach HB300-400. At high impact loads, the hardness can reach HB500-800. Depending on the impact load, the depth of the hardened layer can reach 10-20mm. The hardened layer with high hardness can resist impact and reduce abrasive wear. High manganese steel has excellent anti-wear performance under the condition of strong impact abrasive wear, so it is often used in wear-resistant parts of mining, construction materials, thermal power, and other mechanical equipment. Under the conditions of low impact conditions, high manganese steel cannot exert the characteristics of the material because the work hardening effect is not obvious.
Chemical Composition
| Name | Chemical Composition（%） | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| Mn14 Mill Liner | 0.9-1.5 | 0.3-1.0 | 11-14 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
| Mn18 Mill Liner | 1.0-1.5 | 0.3-1.0 | 16-19 | 0-2.5 | 0-0.5 | ≤0.05 | ≤0.06 | ≤0.06 |
Mechanical properties and metallographic structure
| Name | Surface Hardness（HB） | Impact value Ak（J/cm2） | Microstructure |
| Mn14 Mill Liner | ≤240 | ≥100 | A+C |
| Mn18 Mill Liner | ≤260 | ≥150 | A+C |
| C -Carbide | Carbide A-Retained austenite | Austenite | |||
Product specification
| Size | Hole Dia.（mm） | Liner Length（mm） | ||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Tolerance | +20 | +30 | +2 | +3 |
Chrome Alloy Steel
Chromium alloy cast iron is divided into high chromium alloy cast iron (chromium content 8-26% carbon content 2.0-3.6%), medium chromium alloy cast iron (chromium content 4-6%, carbon content 2.0-3.2%), low chromium Three types of alloy cast iron (chromium content 1-3%, carbon content 2.1-3.6%). Its remarkable feature is that the microhardness of M7C3 eutectic carbide is HV1300-1800, which is distributed in the form of a broken network and isolated on the martensite (the hardest structure in the metal matrix) matrix, reducing the cleavage effect on the matrix. Therefore, the high-chromium alloy liner has high strength, ball mill toughness, and high wear resistance, and its performance represents the highest level of current metal wear-resistant materials.
Chemical Composition
| Name | Chemical Composition（%） | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| High Chrome Alloy Liner | 2.0-3.6 | 0-1.0 | 0-2.0 | 8-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Middle Chrome Alloy Liner | 2.0-3.3 | 0-1.2 | 0-2.0 | 4-8 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
| Low Chrome Alloy Liner | 2.1-3.6 | 0-1.5 | 0-2.0 | 1-3 | 0-1.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Mechanical properties and metallographic structure
| Name | Surface（HRC） Ak（J/cm2） | Microstructure | ||||
| High Chrome Alloy Liner | ≥58 | ≥3.5 | M+C+A | |||
| Middle Chrome Alloy Liner | ≥48 | ≥10 | M+C | |||
| Low Chrome Alloy Liner | ≥45 | ≥15 | M+C+P | |||
| M- Martensite | C – Carbide | A-Austenite | P-Pearlite | |||
Product specification
| Size | Hole Dia.（mm） Liner Length（mm） | |||
| ≤40 | ≥40 | ≤250 | ≥250 | |
| Tolerance | +20 | +30 | +2 | +3 |
Cr-Mo Alloy Steel
H&G Machinery uses Cr-Mo alloy steel to cast ball mill liner. This material based on Australia standard, (AS2074 Standard L2B, and AS2074 Standard L2C）it’s provides superior impact and wear resistance in all semi-autogenous milling applications.
Chemical Composition
| Code | Chemical Elements（%） | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| L2B | 0.6-0.9 | 0.4-0.7 | 0.6-1.0 | 1.8-2.1 | 0.2-0.4 | 0.3-0.5 | ≤0.04 | ≤0.06 |
| L2C | 0.3-0.45 | 0.4-0.7 | 1.3-1.6 | 2.5-3.2 | 0.6-0.8 | 0.3-0.5 | ≤0.04 | ≤0.06 |
Physical Property & Microstructure
| Code | Hardness（HB） | Ak（J/cm2） | Microstructure |
| L2B | 325-375 | ≥50 | P |
| L2C | 350-400 | ≥75 | M |
| M-Martensite, C-Carbide, A-Austenite, P-Pearlite | |||
Ni-hard Steel
Ni-Hard is a white cast iron, alloyed with nickel and chromium suitable for low impact, sliding abrasion for both wet and dry applications. Ni-Hard is an extremely wear-resistant material, cast in forms and shapes which are ideal for use in abrasive and wear environments and applications.
Chemical Composition
| Name | C | Si | Mn | Ni | Cr | S | P | Mo | Hardness |
| Ni-Hard AS2027 Gr Ni Cr 1-550 | 3.2-3.6 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 550-600HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 2.8-3.2 | 0.3-0.8 | 0.2-0.8 | 3.0-5.0 | 1.5-3.0 | ≤0.12 | ≤0.15 | ≤0.5 | 500-550HBN |
| Ni-Hard AS2027 Gr Ni Cr 2-550 | 3.2-3.6 | 1.5-2.2 | 0.2-0.8 | 4.0-5.5 | 8.0-10.0 | ≤0.12 | ≤0.15 | ≤0.5 | 630-670HBN |
White Iron Steel
Chemical Composition
| Name | Chemical Composition(%) | |||||||
| C | Si | Mn | Cr | Mo | Cu | P | S | |
| White Iron Steel Liner | 2.0-3.3 | 0-0.8 | ≤2.0 | 12-26 | ≤3.0 | ≤1.2 | ≤0.06 | ≤0.06 |
Physical Property & Microstructure
| Name | HRC | Ak(J/cm2) | Microstructure |
| White Iron Steel Liner | ≥58 | ≥3.5 | M+C+A |
| M-Martensite C- Carbide A-Austenite | |||
If you have a special material inquiry, please contact our engineer to service you!
Nick Sun NICK@XZHUAGANG.COM
Post time: Jun-19-2020